GME TX6200 - Manual (Page 25)

TX6200 I N S T R U C T I O N M A N UA L PAGE 25
MENU FUNCTIONS
The TX6200 menu feature provides
a convenient method of customising
some of the radio’s functions. The follow
parameters can be accessed:
IMPORTANT: Before accessing the
Menu functions, ensure the radio is not
in Scan or Call modes.
On normal CB channels, the Menu
options are accessed in the following
sequence:
Squelch Sensitivity -> CTCSS Tones ->
S-Meter Display -> Exit
On ‘Receive Only’ channels, the
sequence is:
Frequency Edit -> Squelch Sensitivity ->
CTCSS Tones -> S-Meter Display -> Exit
To access the Menu functions
• Press and HOLD the F key until the
radio beeps. The Menu mode will be
selected and the first Menu option will
be displayed.
• Press the or key to change the
setting of the selected option.
• Briefly press the F key again to cycle to
the next Menu option.
• Pressing the F key again on the last
Menu option will exit the Menu mode.
To exit the menu at any point, press and
hold the F key until the radio beeps or
simply wait 10 seconds and the menu
will time out.
NOTE: When you change the settings within
a Menu option, the new setting becomes
available immediately.
SQUELCH SETTINGS MENU
OPTION
The sensitivity of the Squelch to incoming
signals can be set to suit your operating
environment. The TX6200 has three
preset squelch sensitivity settings (SQL-1,
SQL-2 & SQL-3) which can be selected in
the Squelch setting menu.
SQL-1: Maximum Sensitivity
The squelch will open even on very weak
signals. This is the best setting for quiet
country or rural locations where there
are few weak unwanted signals or little
locally generated interference.
SQL-2: Medium Sensitivity
The squelch will open on most signals,
but will not be as sensitive to very weak
signals or local interference. Suitable for
general or suburban use.
CB channels
• Squelch Sensitivity Settings
• CTCSS Activation and Tone
Frequencies
• S-Meter Display Function
Receive only channels
• Frequency Display and Edit
• Squelch Sensitivity Settings
• CTCSS Activation and Tone
Frequencie
• S-Meter Display Function