GME TX680 - Manual (Page 16)

5. BUtton BeeP tone settings
The Button beep tone feature allows
the Radio to sound a confirmation tone
whenever the
SQL , SCAN , MODE , ,
or DUP keys are pressed.
To Turn the Button Beeps Tones On
or Off
From the Standby mode:
1. Press the
MODE key FIVE times to
select the Button Beep setting mode.
‘bP’ will be displayed along with a
flashing icon.
2. Press the or keys to set the beep
to ‘On’ or ‘oF’ as desired.
3. Press and hold the MODE key (or
press the PTT key momentarily) to
confirm and store your selection. If the
Button Beep function is on, the icon
will remain steady on the display and a
beep will be heard in response to key
activations.
6. CAll AlArm seleCtion
The TX680 provides 5 user selectable call
alarm melodies to alert other users to your
incoming call. When enabled, the melody
can be transmitted to another user where
it will be heard in the speaker of the
receiving radio.
To Select your Favourite Call Alarm
Melody
From the Standby mode:
1. Press the MODE key SIX times to
select the Call Alarm setting mode. ‘C’
will be displayed.
2. Press the or keys to preview
(listen) to the 5 available call melodies.
3. To turn the call melodies off, select
‘oF’.
4. Press and hold the MODE key (or
press the PTT key momentarily) to
confirm and store your selection.
To Send the Call Alarm Melody
Press the PTT switch twice quickly.
The LED indicator will light Red for a
few seconds as the melody is sent. The
melody will be heard in the speaker of the
receiving radio.
The call alarm can only be sent once
per minute.
Page 16 INSTRUCTION MANUAL TX680