HONDA 2014 Odyssey - Owner's Manual - Manual (Page 483)

uu Replacing Light Bulbs u Brake Light, Rear Side Marker/Taillight and Rear Turn Signal Light Bulbs
482
Main
tenan
ce
2. Place one hand on the outer corner of the
taillight assembly and other hand on the
lower edge of the taillight, near the cargo
area.
3. Pull the outer corner of the taillight
assembly toward you while supporting the
assembly with the hand closest to the cargo
area.
4. Turn the socket to the left and remove it.
5. Remove the old bulb and insert a new bulb.
1 Brake Light, Rear Side Marker/Taillight and Rear Turn Signal Light
Bulbs
To reinstall, insert the fasteners into the grommets
and push the assembly back into place.
u Do not reinstall the assembly if the grommets are
loose or out of the holes. Contact a dealer to
replace them.
Grommet
Bulb
Socket
Upper
Fastener
Lower
Fastener
14 US ODYSSEY-31TK86300.book 482 ページ ２０１３年７月２５日 木曜日 午後４時２３分