HONDA 2013 Crosstour - Owner's Manual - Manual (Page 61)

59
uu Child Safety u Safety of Infants and Small Children
Continued
Safe Driving
A LATCH-compatible child seat can be installed in either of the two outer rear seats.
A child seat is attached to the lower anchors with either the rigid or flexible type of
connectors.
1. Locate the lower anchors under the marks.
2. Place the child seat on the vehicle seat then
attach the child seat to the lower anchors
according to the instructions that came
with the child seat.
u When installing the child seat, make sure
that the lower anchors are not
obstructed by the seat belt or any other
object.
■ Installing a LATCH-Compatible Child Seat
Marks
Rigid Type
Lower Anchors
13 CROSSTOUR-31TP66300.book 59 ページ ２０１２年９月２７日 木曜日 午後３時２７分