IC Realtime Professional 3-D DVR/PTZ Keyboard with Network Capability - Manual (Page 23)

23
5.2.1 RJ45 port connection
5.2.1.1 Direct connection
Please refer to the Figure 5-6.for direct connection information.
Figure 5-6
5.2.1.2 Connect via HUB
Please refer to the following figure if you are connecting via the hub. See Figure 5-7.
……
……
Figure 5-7
5.3 DVR and Keyboard Setup
5.3.1 DVR Setup
Before operation, please make sure cable connection is proper.
In DVR menu, from “Setting” to RS232. See Figure 5-8.
The default setup is shown as below.
z
Function: network keyboard
z Baud rate: 9600
z Data bit: 8
z Stop bit: 1
z Parity: none.
Please note keyboard setup should conform to DVR setup.
Crossover cable
Straight-through cable
Switch