IC Realtime 22X Optical / 10X Digital Zoom High Res Day/Night Speed Dome-24VAC (ICR2200DN) - Manual (Page 8)

Speed Dome Camera Instruction Manual 8/47
Parts Name & Functions
Main Body
Cable
DIP Switch
Lockup Screw
Drop Prevention
Spring
Cabling
Terminal Block
Fuse
Main Body
Connector
Mold Line
z Main Body z Mount Bracket
z Dome Cover Do not detach protection vinyl from dome cover before finishing all
installation process to protect dome cover from scratches or dust.
z DIP Switch Sets up camera ID and protocol.
z Main Body Cable
Main Body Connector
Enables signals and power to come and go between main body and
mount bracket.
z Drop Prevention Spring This part keeps the camera from dropping during installation and
maintenance. After install the Bracket, please, hang the spring to the
drop prevention hook of main body as shown in picture for further
tasks.
z Lockup Screw After assembling main body to bracket, screw main body to bracket to
protect them from separation by vibration and so on.
z Fuse If the fuse is burnt to protect your came from over-current damage, the
fuse have to be replace with new one. The fuse specification is 250V 3A.
However, we recommend consulting with supplier to remove the cause
of over-current.
z Cabling Terminal Block During installation, Power, Video, Communication, Alarm I/O cables are
connected on to this cabling terminal block.
z Mold Line Mark to assemble main body to bracket.
INTRODUCTION 1