IC Realtime The Sentinal WDR 36x Optical Zoom, 32x Digital Zoom IR PTZ Camera - Manual (Page 14)

14
DIP SW ID DIP SW ID DIP SW ID
1011001 77 0010011 100 1101111 123
0111001 78 1010011 101 0011111 124
1111001 79 0110011 102 1011111 125
0000101 80 1110011 103 0111111 126
1000101 81 0001011 104 1111111 127
0100101 82 1001011 105
1100101 83 0101011 106
• RS485 Termination
If Robo PTZ is using RS485 communication, please make sure the Bus is correctly installed and configured
to prevent malfunctions. The maximum allowed cable distance is 1200 metres. A Maximum of 32 units
can be connected to a cable section.
Any cable type which exceeds the specification of EIA RS485 can be used. The furthest device, by cable
length, should be terminated in accordance with the specification. Other devices should remain un-
terminated (see Figure 11 below).
• Keyboard Operation
Key Sequences and Joystick movements are executed to closely control the camera and program the
Telemetry Control system of Robo PTZ. Examples of these are PRESET and TOUR.
If a Keyboard cannot be used to access and change the camera parameters, most characteristics are
accessible through the camera’s OSD menu.
Note – Changing a Keyboard’s Software and/or Protocol can effect alterations to the camera’s
operability. The Robo PTZ manufacturer absolves itself of responsibility for such modifications.