Interlogix MC355-1T/1S User Manual - Manual (Page 44)

40 IFS MC355-1T/1S User Manual
switch. Q-in-Q Tag ether type can be set same as VLAN tag ether type or other
values.
This function provides IEEE 802.1Q Q-in-Q VLAN setting of MC355-1T/1S. Press
the “Apply” button to save the latest configuration.
Figure 36: Q-in-Q VLAN setting Web Page screen
The Q-in-Q VLAN setting Web page includes the following configurable data:
Q-in-Q Enable Disable or enable the Q-in-Q VLAN function. Default mode is
Disable.
Q-in-Q Direction Provides two directions for Q-in-Q function, the available options
are:
UTP is customer port, Fiber is main port
Fiber is customer port, UTP is main port
Default mode is UTP is customer port, Fiber is main port.
Out Layer VLAN Tag
EtherType (HEX) Defines the Out Layer VLAN Tag Ether Type and default mode is
0x8100.
Out Layer VLAN VID
(DEC) Defines the Out Layer VLAN VID and default mode is 1.
Apply Button Press this button to save the latest configuration of the MC355-
1T/1S.
Quality of Service
Quality of Service (QoS) is an advanced traffic prioritization feature that allows
you to establish control over network traffic. QoS enables you to assign various