Remote ping – Interlogix NS2503-24P/2C User Manual User Manual
Page 65
![background image](/manuals/679188/65/background.png)
NS2503-24P/2C User Manual
65
Remote Ping
The Remote Ping allows user to check the device connection status via the ping function.
Figure 4-3-8:
Remote Ping interface
The page includes the following fields:
Object
Description
Remote IP Address
Allows user to define the IP address of remote device.
Ping Size
Allows user to define ping packet size. Generally, the size should be 64.
Ping
Click “Ping” button to start ping to remote device.
Result
Shows ping action result.
If the ping successful, it will be showed “Ping Ok, Send 5 Packet, I 5 Packet”.
If the ping failed, it will showed “Ping Failed”
Save
Click the “Save” button to save the Remote Ping configuration. A User can use the
ping function even when the configuration is not saved. When the configuration is
not saved, and the WEB page is refreshed, the
configuration is cleared.
Reset
Clicking the “Reset” button will reset all Remote Ping configuration and save
automatically.
Clear
Click “Clear” button will clear result message.