Interlogix UVC-6120-1 User Manual - Manual (Page 13)

UltraView UVC-6120-1 Digital WDR Camera User Manual 11
Menu item Description
Outdoor Select this option to optimize the WB for outdoor sunlit applications. The ATW
compensates for high color temperature such as daylight.
Indoor Select this option to optimize the WB for indoor applications. The ATW
compensates for low color temperature such as incandescent lighting.
Anti CR The anti-color rolling mode function minimizes the color changes over long
periods caused by very small differences between the flicker frequency of non-
inverter fluorescent lights and the drive frequency of the image sensor devices.
Return Press Enter to return to the previous menu.
Exit & Save Exits the menu and returns to live mode. Saves changes made.
D/N mode menu
This camera function controls when the dome camera switches to day or night
mode. The dome camera produces high-quality color video during the day or
when light levels are high. At night or when light levels are low the camera
switches monochrome and removes the infrared filter to improve IR sensitivity.
Select the D/N Mode option from the Main menu to enter the D/N mode menu.
Table 6: D/N mode menu
Menu item Description
Auto When set to Auto Day/Night mode, the camera produces high-quality color
video during the day or when light levels are high. It then switches to
monochrome and removes the infrared filter to improve IR sensitivity at
night or when light levels are low. Set following parameters:
Day→Night: Set the threshold level on how dark it should be before
switching from Day to Night mode. Lower (Higher) value makes the
camera switched from Day to Night at lower (higher) illumination
Night→Day: Set the threshold level on how light it should be before
switching from Night to Day mode.
Delay seconds:
This is the time in seconds before Day↔Night switches.
A long delay response would be used, for example, to avoid switching
from Night to Day mode when car headlights pass in front of the camera.
CAUTION
: If there is a minimal difference between the Day→Night and
Night→Day values, then camera may switch between Day and Night
mode repeatedly.
Day Manually select Day mode only. The camera can only be in Day mode.
Night Manually select Night mode only. The camera can only be in Night mode.
Ext Externally triggered D/N switch.
Return Press Enter to return to the previous menu.
Exit & Save Exits the menu and returns to live mode. Saves changes made.