Interlogix TruVision IP Megapixel PTZ Installation Manual - Manual (Page 17)

Installation Guide 17
Pin definitions
There are eight wires on a standard UTP/STP cable and
each wire is color-coded. The following shows the pin
allocation and color of straight and crossover cable
connection:
Figure 3: Straight-through cable
1 White/Orange White/Orange 1
2 Orange Orange 2
3 White-Green White-Green 3
4 Blue Blue 4
5 White/Blue White/Blue 5
6 Green Green 6
7 White/Brown White/Brown 7
8 Brown Brown 8
Figure 4: Cross-over cable
1 White/Orange White/Orange 1
2 Orange Orange 2
3 White-Green White-Green 3
4 Blue Blue 4
5 White/Blue White/Blue 5
6 Green Green 6
7 White/Brown White/Brown 7
8 Brown Brown 8
Please make sure your connected cables have the same
pin assignment and color as above before deploying the
cables in your network.