Connecting the istorage diskgenie with usb y-cable, How do i use the istorage diskgenie the first time, What if i forget the user password – iStorage diskG Manual User Manual
Page 7
www.istorage-uk.com
7
Connecting the iStorage diskGenie with USB Y-Cable
If the indicator light does not power on a single USB connection, use the included
USB Y-cable.
1.
Attach the iStorage diskGenie’s integrated USB cable to the female connector of
the USB Y-cable.
2.
Connect the two male USB connectors to two available
USB ports on your computer.
3.
The iStorage diskGenie indicator light should glow red.
How do I use the iStorage diskGenie the first time?
You can use it in one of the following ways:
•
Enter the Admin Mode with 123456 (default administrator password),
and then you are able to change the Admin Password or create a User
Password.
•
Directly enter the Secure User Mode with 123456 (default Admin Password)
to use the iStorage diskGenie.
What if I forget the User Password?
Use your Admin Password to enter Admin Mode, and then create another User
Password in Admin Mode.