Philips CCX134AT - Manual (Page 12)

12 Setting the Clock
There are three ways to set the ciocic Manually, with Automatic
PBS Channel Selection, or with Manual PBS Channel Selection.
With manual dock setting, you tell theTYA/CR the current
time.TheTV/VCR then adjusts the time accordingly.With
Automatic or Manual PBS Channel Selection, theTV/VCR gets the
current time from your local PBS station. It updates the time by
referring to
your PBS station broadcasts. If you use either Manual
PBS Channel Selection or Automatic PBS Channel Selection, follow
the steps on page 19 to have theTVA/^CR update the clock
according to yourTime Zone.
To set the clock manually, follow the steps on pages 12 -13,To set
the clock using Automatic PBS Channel Selection, follow the steps
on pages 1 4 - 1 S.To set the clock using Manual PBS Channel
Selection, follow the steps on pages 16 - 17.
Before you begin, make sure:
o TheTVA^CR is hooked up and turned on. Deia//s are on pages six
- eight.
o Channels are programmed. Details are on pages fO - II.
o You make each entry within 60 seconds of the previous entry. (If
you do not, you may start again at step I.)
Manual Clock Setting
Press the COMBI button, then the MENU button to dis­
play the pop up menu.
► PRIM-SEnjP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
PRESS +
Press the Play/A button or the Stop/T button to select
PRIM. SETUP-Then, press the Fast Forward/Searchf+ but­
ton.
PRIMARY SETUP
1 SELECT LANGUAGE
2 AUTO PROGRAMMING
3 ADD/DELETE CHANNEL
4 CH. MEMORY REVIEW
5 VOLUME BAR
[ON]
6 SET CLOCK
7 REMOTE LOCATOR
TO SELECT PRESS NUMBER
TO END PRESS EXIT
Press the Number 6 button to select SET CLOCK.
SET CLOCK
1 AUTO CLOOC
2 SET MANUAL CLOCK
3 DAYUGHT SVG.TIME
4 SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
TO SELECT PRESS NUMBER
TO END PRESS EXIT
Helpfu ! Hmts
" Entries that do not match the
TV/VCR^s internal calendar will
cause a question mork (?) to appeor
on the TV/VCR screen.
“ To make corrections while you are
setting the clock, press the CLEAR
button until the space for the num­
ber you want to correct is flashing.
Then enter the correct number.
* To make corrections after you have
set the clock, start again at step L
o If you press the STATUSfEXlT but­
ton when you are setting the clock,
the
TViVCR will exit
Set
Clock mode
and return to the program you were
watching.