Philips AZ 8057 - Manual (Page 7)

CD PLAYER
Playing a CD JB
,¡2
s
UJ
1 Set the POWER selector to CD.
2 Open the lid by pressing the OPEN-CLOSE button.
3 Insert an audio CD (printed side up) and close the lid.
-► The CD player starts and scans the contents list of the CD.
After that, the total number of tracks appear on the display
and the CD player stops.
4 Press the PLAY-PAUSED- button to start CD play.
-► Display indication: the current track number.
5 Press the STOP ■ button to stop CD play.
-► Display indication: the total number of tracks.
• You can interrupt CD play by pressing PLAY-PAUSED-.
Continue CD play by pressing the button again.
-► Display indication: the current track number flashes.
Note: CD play will also stop
- if you open the lid;
- if you move the POWER selector or
- if the end of the CD is reached.
Example
Display indication in
pause position:
the current track number
flashes.
Display indication;
whan the CD lid is open.
SEARCH backwards and forwards
Selecting another track
• Briefly press the SEARCH r« or button once/several times to
skip to the beginning of the current/previous or subsequent
track(s).
-► Display indication: the selected track number.
-► During piay: CD play continues automatically with the
selected track.
-► In stop position: press PLAY-PAUSED- to start CD play.
Searching for a passage during CD play
1 Hold down the SEARCH or^w button to find a particular
passage in fonwards or backwards direction.
-► CD play continues at a low volume.
2 Release the button when you have reached the desired passage.
Note: In the SHUFFLE and in REPEAT-1 mode and when playing a
program, searching is only possible within the particular track.