Philips FW510C - Manual (Page 27)

Radio Reception General
Poor radio reception.
® The sigtml strength is too weak.
■ > Adjust the antenna.
® The TV or VCR is too close to the stereo system.
Separate the stereo system from the TV or VCfi.
Connect an external antenna for better reception.
Tape Deck Operation
"RCCOfTjjirJij RLTIt'E" is displayed.
• A recording is in progress.
Stop the recording or wait until it is finished.
"TRPC SUSMNG OittAJ" is displayed.
• Tape dubbing is only possible in tape mode.
Switch source to tape mode.
Recording or playback cannot be made or there is a
decrease in audio level.
• Dirty tape heads, capstans or pressure I'ollers.
i -* See section on tape deck maintenance.
• Magnetic build-up in the record/playback head.:
Use demagnetizing tape.
System does not react when any button is pressed.
• Electrostatic discharge,
- ‘ Cross SIANDBY^ON to switch the system off
Remove the AC power plug from the wall outlet, then
reconnect and switch on the system again.
No or poor sound.
• Volume is not turned up.
Adjust VOLUME.
« The headphones are connected.
^ Disconnect the headphones.
• Speakers are not connected or are connected wrongly.
Check that the speakers are connected correctly.
-* * Make sure that the stripped speaker wire is clamped.
Reversed left and right sound.
» Speaker's are incorrectly connected,
- * Check the speaker connections and location.
Lack of bass sound or apparently imprecise
physical location of musical instriimeuts.
• Speakers are incorrectly connected.
-" Check the speaker connection for proper phasing, red/
black wires to red/black terminals.
Remote control has no effect on the system.
• Wrong source is selected.
■ ’ Select the source (CD, TUNER, etc.) before pressing
the function button (PLAY, PREV/NEXT, etc.}.
• Tiro distance to the .system is too large.
■ * Reduce tho distance.
• Batteries are inserted incorrectly.
■ - Insoit tho batteries with thetr polarities (+/- signs) as
indicated.
® Balttrries are exhausted.
..• Replace tho batteries.
Timer not working.
• Timer is not switclied on.
• ” Press CLOCK» TIML/I on the .system to .switch on the
timer.
• Dubbing/rocoiding is ¡(1 progress.
- - Stop dubbing/rocording.
System display features automatically and huUons
flashing continuously.
• Demonstration rnode is switched on,
* P(Oss and hold SI OP H for 3 seconds to switch off
the demonstration.
<
t ; » ' r
27