Philips AZ6808/17 - Manual (Page 11)

MEMORY
PROGRAMMING TRACK NUMBERS
You may select a number of tracks and store these in the memory in the desired
sequence. When playing, you will only hear the stored titles in the selected se­
quence. A maximum of 32 tracks can be stored in the memory. You may store
each track more than once.
Programming during PLAY or in position STOP
• Press MEMORY briefly; the word MEMORY flashes.
• Within 4 seconds, press the button km PREVIOUS or NEXT kh until the display
shows the required track number.
• Within 4 seconds, store this track by pressing MEMORY briefly. The character
P (PROGRAM) appears, indicating that the track has been stored.
• Select and store all desired titles in this way.
• To play your selection, the CD player should be in STOP mode. Then press PLAY
>: the word MEMORY appears.
Programming during SCAN
• Press SCAN to play the first few seconds of each track.
• As soon as you recognize a desired title, press MEMORY briefly; the word
MEMORY flashes.
• Within 4 seconds, store this track by pressing MEMORY briefly again. The char­
acter P (PROGRAM) appears, indicating that the track has been stored.
• To play your selection, first press STOP □ and then PLAY >; the word MEMORY
appears.
- Store all desired titles in the required sequence. You may store each track more
than once.
- A maximum of 32 tracks can be stored in the memory. When the memory is
full, the character P (FULL) appears.
- When pressing MEMOfiY for longer than 1 second, the display will show in se­
quence all the stored track numbers.
- You can simply erase the whole memory by pressing STOP □ for a second
time: the character C for CLEAR appears.
The contents of the memory are also erased;
- by opening the CD cover using the OPEN button;
- if the battery becomes exhausted or if the power supply is interrupted in an­
other way.
11