Cisco 78-18233-01 User Manual
Using cisco ipics on your ip phone, Prerequisites, For more information
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems
logo are registered trademarks or trademarks of
Cisco Systems, Inc. and/or its affiliates in the United States
and certain other countries. All other trademarks
mentioned in this document or Website are the property of
their respective owners. The use of the word partner does
not imply a partnership relationship between Cisco and any
other company. (0705R)
© 2007 Cisco Systems, Inc. All rights reserved.
78-18233-01
Printed in the USA
DOC-7818233=
Q
UICK
S
TART
Using Cisco IPICS
on Your IP Phone
Prerequisites
Identifying the Buttons and Softkeys
on the IP Phone
Accessing and Using Cisco IPICS
Tips and Guidelines for Using
Cisco IPICS
For More Information
Prerequisites
The following prerequisites must be met
before you can access the Cisco IPICS
service from a Cisco Unified IP Phone:
•
The Cisco IPICS service must be
configured as a phone service for
Cisco Unified CallManager or for
Cisco Unified CallManager Express.
•
User login credentials must be
configured in your user profile in the
Cisco IPICS server.
•
Cisco Unified CallManager users must
subscribe to the Cisco IPICS service by
using the Cisco Unified CallManager
User Options web site.
Identifying the Buttons and
Softkeys on the IP Phone
When the Cisco IPICS service is enabled on
your IP phone, you can communicate with
other Cisco IPICS users to participate in
assigned channels and VTGs by using the
buttons and softkeys on your IP phone.
Note:
The softkeys that display in the IP
phone touchscreen change based on the
menu that you access. For example, the
Select softkey displays in one menu and the
Submit softkey displays in another menu.
Figure 1 shows an illustration of the
Cisco IPICS service and associated buttons
and softkeys that you use on your IP phone.
Figure 1
IP Phone with Cisco IPICS
For More Information
For additional information about the
Cisco IP Interoperability and Collaboration
System (Cisco IPICS), release 2.1(1), refer
to the
Refer to the following URL for the
complete Cisco IPICS documentation suite: