Save these instructions, S ave these instructions, Page 2 – Intex CS7111 Krystal Clear Saltwater System 2014 User Manual

Page 9: English, English page 9

Advertising
background image

SAVE THESE INSTRUCTIONS

Page 2

(189PO) MODEL CS7111 SALTWATER SYSTEM & FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013

English

189

PO

S AVE THESE INSTRUCTIONS

English

Page 9

POOL INLET - NOZZLE & PLUNGER VALVE SETUP (OPTIONAL)

1. Grasp the nozzle and plunger valve mechanism.

2. In a counter-clockwise motion unscrew plunger valve

union from the threaded strainer connector

(24) (see

drawing 5). Be careful not to lose the step rubber

washer

(21). Place the plunger valve on the ground in a

safe place.

3. In a counter-clockwise motion unscrew the strainer

nut

(22) from the threaded connector (24). Leave the flat

washer

(23) on the connector (24).

4. Install the nozzle and plunger valve at the upper position

of the pool inlet.

From the inside of the pool liner insert

the connector

(24) into one of the pre-cut holes with the

washer remaining on the connector to be placed against

the inside of the liner wall.

5. Before assembly, lubricate the threads with a petroleum

jelly. Then, with the flat side of the strainer nut

(22)

facing the outside wall of the liner in a clockwise motion

screw the strainer nut

(22) back onto the threaded

connector

(24) (see drawing 6).

6. Finger tighten the adjustable pool inlet nozzle (25) and

the strainer nut

(22) onto the threaded connector (24).

7. Grasp the plunger valve assembly. Make sure the step

washer

(21) is in place.

8. In a clockwise motion turn the plunger valve handle to

close position. Ensure the plunger valve is securely

closed. This will prevent water from flowing out during

filling of the pool

(see drawing 8).

9. NOTE: Never cover the vacuum release valve (35)

unless it is damaged or leaking. Replace the vacuum

release valve immediately.

10. Adjust the direction of the nozzle head pointing away

from the pool outlet for a better circulation result

(see

drawing 9).

11. The pool liner is now ready to be filled with water.

Consult the above-ground-pool owner’s manual for filling

instructions.

5

2

1

7

1

2

6

23

24 25

INSIDE

LINER WALL

22

9

WATER

FLOW

POOL

8

INSIDE

LINER WALL

35

Advertising