Cuisinart CBM-18 - Manual

We warrant that should your Cuisinart® Programmable Conical Burr Mill prove
to be defective within the warranty period, we will repair it or replace it at our
option, without charge to you. We recommend that you visit our website,
www.cuisinart.com for a fast, efficient way to complete your product registra-
tion. However, product registration does not eliminate the need for the con-
sumer to maintain the original proof of purchase in order to obtain the warranty
benefits. In the event that you do not have proof of purchase date, the purchase
date for purposes of this warranty will be the date of manufacture. To obtain
warranty service, simply call our toll-free number: 800-726-0190, for additional
information from our Consumer Service Representatives, or send the product to
Consumer Service at Cuisinart, 7811 North Glen Harbor Blvd., Glendale, AZ
85307. To facilitate the speed and accuracy of your return, please enclose a check
or money order for $4.00 for shipping and handling.
(California residents need only supply proof of purchase and should call 1-800-
726-0190 for shipping instructions.) NOTE: For added protection and secure
handling of any Cuisinart® product that is being returned, we recommend you
use a traceable, insured delivery service. Cuisinart cannot be held responsible
for in-transit damage or for packages that are not delivered to us. Lost and/or
damaged products are not covered under warranty. Your Cuisinart® Program-
mable Conical Burr Mill has been manufactured to strict specifications and has
been designed for use with the Cuisinart® Programmable Conical Burr Mill
authorized accessories and replacement parts for your model. These warranties
expressly exclude any defects or damages caused by accessories, replacement
parts or repair service other than those that have been authorized by Cuisinart.
These warranties exclude all incidental or consequential damages. Some states do
not allow the exclusion of or limitation of incidental or consequential damages,
so the foregoing limitation or exclusion may not apply to you.
CALIFORNIA RESIDENTS ONLY
California law provides that for In-Warranty Service, California residents have
the option of returning a nonconforming product (A) to the store where it was
purchased or (B) to another retail store which sells Cuisinart products of the
same type. The retail store shall then, according to its preference, either repair
the product, refer the consumer to an independent repair facility, replace the
product, or refund the purchase price less the amount directly attributable to the
consumer’s prior usage of the product. If the above two options do not result in
the appropriate relief to the consumer, the consumer may then take the product
to an independent repair facility if service or repair can be economically accom-
plished. Cuisinart and not the consumer will be responsible for the reasonable
cost of such service, repair, replacement, or refund for nonconforming products
under warranty. California residents may also, according to their preference,
return nonconforming products directly to Cuisinart for repair or, if necessary,
replacement by calling our Consumer Service Center toll-free at 800-726-0190.
Cuisinart will be responsible for the cost of the repair, replacement, and shipping
and handling for such nonconforming products under warranty.
BEFORE RETURNING YOUR CUISINART PRODUCT
Important: If the nonconforming product is to be serviced by someone other
than Cuisinart’s Authorized Service Center, please remind the servicer to call
our Consumer Service Center to ensure that the problem is properly diagnosed,
the product serviced with the correct parts, and to ensure that the product is still
under warranty.
CBM-18
Programmable Conical Burr Mill
MANUAL GRIND
If you prefer, after selecting your grind setting, you have the
option of manually controlling how much coffee the unit will
grind. To do so, follow steps 1-4 on previous page. Then press
and hold the manual button until the desired amount of coffee
has been ground. The LCD will display M.
NOTE: To avoid overflow when using the manual feature, the
grinder will automatically stop grinding when the maximum
capacity has been reached.
GRINDING SETTINGS
When selecting your grind setting remember that the higher the
number the coarser the grind. Use 1-6 for Espresso, 7-12 for
Auto Drip, and 13-18 for French Press.
CLEANING/MAINTENANCE
INSTRUCTIONS
1. Be sure plug has been removed from outlet.
2. Beans can be removed from the hopper by lifting off the lid
and pouring excess beans out. Hold down the Manual button
to cleanout any remaining beans.
3. The bean hopper, bean hopper lid, grind chamber, and grind
chamber lid can be washed by hand with hot, soapy water or
placed in the top shelf of a dishwasher. Dry thoroughly.
a. Remove the bean hopper by rotating counter-clockwise
bringing the selector past grind setting 18, align the
arrows and lift up. Make sure the hopper is empty.
b. Remove grind chamber by pulling toward you.
4. Remove the burr grinder, once the bean hopper has been
removed, by grasping the metal handle and lifting up. Use
the brush to remove grinds or wash by hand. Replace the
burr grinder onto the unit and rotate until the piece is fully
inserted. Push handle down and replace hopper.
NOTE: The hopper will not attach to the unit if the
grinder has not been fully inserted.
5. Wipe body of grinder with a damp cloth.
6. Any other servicing or maintenance should be performed by an
authorized service representative.
WARNING: NEvER ImmERSE UNIT IN WATER
WARRANTY
The Cuisinart® Programmable Conical Burr Mill carries a Limited
18-Month Warranty. This warranty is available to consumers only.
You are a consumer if you are the owner of a Cuisinart® Programmable Conical
Burr Mill that was purchased at retail for personal, family, or household use.
Except as otherwise required by applicable state law, this warranty is not available
to retailers or other commercial purchasers or owners.
©2010 Cuisinart
150 Milford Road, East Windsor, NJ 08520
Printed in China 10CE113938
IB-8304A
10ce113938_cbm18_ib.indd 1-3 7/23/10 3:59:11 PM