Medela Harmony - Manual (Page 14)

14
5. Cleaning
Dry with a clean cloth or leave to
dry on a clean cloth. Store the
clean parts in an air-permeable,
clean bag/container, or in an
air-permeable, clean paper/cloth
until next use.
Disassemble the pump set
into its individual parts.
5.2 Before using for the
first time and once a day
1
I Do not drop the parts of the
pump set into boiling water.
I To avoid contamination, do not
touch the inside of the parts after
sterilisation.
l Take apart and wash all parts
that come in contact with the
breast and breastmilk imme-
diately after use to avoid drying
up of milk residues and to
prevent growth of bacteria.
l Only use drinking-quality water
for cleaning.
Caution
i
l When you boil the parts of the
pump set, you could add a tea -
spoon of citric acid to avoid a
build-up of limescale.
When you use citric acid, minor
traces might remain on the pump
parts. Use drinking-quality water
to wash them off. Dry the parts as
shown in figure 3 to the right.
Note
1
3