Keri Systems PXL-250 Quick Start User Manual
Pxl-250 tiger controller, Pxl-250 quick start guide
Advertising
PXL-250 Tiger Controller
1530 Old Oakland Road, Suite 100
01835-002 Rev. 4.2
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 1 of 25
PXL-250
Quick Start Guide
This quick start guide provides, basic installation information, drawings, first time power-on instructions, and short
descriptions of key terms and concepts for installing controllers. For comprehensive information regarding the PXL-
250 Tiger Controller, please refer to the Technical Reference (P/N 01836-004).
NOTE: It is the responsibility of the installation organization to have only technically qualified personnel performing
the installation.
Figure 1: The PXL-250 Controller
Advertising
Table of contents
Document Outline
- 1.0 Specifications
- 2.0 Cable Requirements
- 3.0 When Installing Controllers
- 4.0 Wiring Instructions
- 4.1 Terminal Blocks
- 4.2 Connecting the Earth Ground and the 12 VDC Power
- 4.3 Connecting a Keri Systems Proximity Reader to a PXL-250P
- 4.4 Connecting a Wiegand Compatible Reader to a PXL-250W
- 4.5 Connecting a Door Status Input
- 4.6 Connecting a Request to Exit (RTE) Input
- 4.7 Connecting a General Purpose Input
- 4.8 Connecting an Alarm Output Relay
- 4.9 Connecting a Fail-Safe Lock Output Relay
- 4.10 Connecting a Fail-Secure Lock Output Relay
- 4.11 RS-485 Access Control Network Connection
- 4.12 Controller RS-232 Serial Port to PC Connection
- 5.0 Powering The Controller for the First Time
- 6.0 General Information on Inputs
- 7.0 General Information on Safety versus Security with Door Locks