Lippert Components Hydraulic Through Frame Slideout - Manual (Page 12)

Rev: 07.09.2014
Page 12
Hydraulic Through Frame Slideout Owners Manual
CORRECTIVE ACTION FOR SQUEAKING GEAR PACKS
SLIDEOUTS
1. Loosen both gear packs bolts (Fig. 1A and Fig. 1B) until tension is off of the gear pack.
2. Using a manual pump oil can, pump 2-3 squints of synthetic motor oil onto gear pack drive shaft in
lubrication points (Fig. 2A), (Fig. 3A), (Fig. 4 A through D).
NOTE: Do not lubricate rack or pinion gear teeth, lubricate drive shaft only.
NOTE: LCI recommends Mobile One Fully Synthetic 10W-30 Motor Oil to lubricate gear pack.
3. Extend and retract slideout arms several times to work lubricant through gear pack.
Fig. 1 Fig. 2
Fig. 3 Fig. 4
A
B
A
A
A
D
B
C