Longshine LCS-883C-IND - Manual (Page 17)

10Base-T to 10Base-2 Converter
-13-
Powering On Unit
The Converter uses external power supply 12V DC @
0.5A 50~60 Hz.
1. Insert the power cable plug directly into the
receptacle located at the back of the device.
2. Plug the power adapter into an available socket.
3. Check the front-panel LEDs as the device is
powered on to verify that the Power LED is lit. If
not, check that the power cable is correctly and
securely plugged in.
Note:
For International use, you may need to change the AC
power adapter cord. You must use a power cord set that
has been approved for the receptacle type and electrical
current in your country.