Malone MPG460G 2010 - Manual (Page 6)

MPG460G 01-2010
800-295-0042 ext 206 [email protected] 6
4. Pass the wiring harness into the grommet and out the front end of
the tongue as shown. Stretch out the white wire and leave an equal
length of the green/
brown/yellow wire
outside the grom-
met as shown. This
length of wires will
be the connector to
your tow vehicle.
6. Now its time to pass the wire ends thru the
tongue. Make sure the wires are tangle free, then
attach a weight to the end of the wires. A large
socket works great as shown or you could tape
a big bolt to the wires. Tip the tongue up and let
gravity work for you. Feed the wire and let
the weight slide through the tongue pulling
the wires with it.
5. Roll this wire so it
doesn’t get accidentally
pulled inside the tongue.