Figure 10: run tscdfuinstall.bat – Maxim Integrated 73S1217F Windows XP 32 USB CCID and DFU Drivers User Manual
Page 11
UG_12xxF_030
73S1215F, 73S1217F Windows XP 32 USB CCID and DFU Drivers Installation Guide
Rev. 1.0
11
2.3.3 Installing the TSCDFU.sys Driver for the DFU Device Type
Double click on device TSC 12xx DFU Vx.xx
Details, as shown in Figure 9 and select Device
Instance Id from the drop down list. It shows USB\VID_1862&PID_1100\xxxx. This Device Instance Id
indicates that the 73S12xxF device is currently executing the DFU Boot Loader code. Follow these steps
to install the driver:
1. Locate TSCDFUInstall.bat in the provided CD-ROM and make sure you have all these files in the
same directory:
TSCDFU.sys
TSCDFU.inf
devcon.exe
TSCDFUInstall.bat
2. Double click on the TSCDFU.bat icon to start installation.
Figure 10: Run TscDfuInstall.bat
3. As the TSCDFU.sys driver has not been through Windows Driver Certification testing, a warning
message will pop up. Select Continue Anyway to finish up the installation. The driver installation
will complete successfully within a few minutes.
4. Once the TSCDFU.sys driver installation is complete, the Windows Device Manager shows: