Morley ABY MIX (ABY Mix) - Manual

Thanks for buying the Morley ABY Mix
The ABY Mix is designed to route two input signals to two output sources.
Each input has its own level control to balance different input levels. Each
output channel is turned on/off via a footswitch for that channel. Each output
channel has an LED indicator that lights when that channel is on. While there
are countless uses for the ABY Mix, below are a few examples to get you
started. Unity gain is at approximately 10 o'clock on each input knob. From 10
o'clock to 1 o'clock, will add clean boost and turning up beyond 1 o'clock will
add slight overdrive. The ABY Mix powers up from one 9V battery or optional
Morley® 9V 300mA adapter (center polarity is negative). Remove bottom
cover via 4 Phillips head screws to gain access to battery compartment
This product is warranted for two years from date of purchase. To obtain
warranty service, please call Morley® customer service toll free at 1-800-284-
5172 ext 15 or email us at [email protected]
Hooking two output sources together via the ABY Mix may create Ground
Loop Hum in one or more of the output sources, this is a normal occurrence
and can be easily solved. Please visit www.ebtechaudio.com for information
on why Ground Loops occur, tips on diagnosing hum and learn about
products that solve hum and signal problems.
IMPORTANT NOTE: THIS DEVICE IS INTENDED FOR USE WITH PASSIVE
AUDIO SIGNALS, DO NOT USE THIS DEVICE ON POWERED SPEAKER
LINES OR YOU WILL DAMAGE THE AMP AND/OR SPEAKER.
This product is proudly made in the U.S.A.
Sound Enhancement Products, Inc. 325 Cary Point Drive Cary IL 60013
www.morleypedals.com
Example #1 Example #2 Example #3