Muse Research Musebox manual v1.0 - Manual (Page 32)

32
3. Turn the gain control to minimum on Input A and plug in your guitar. Turn the bottom encoder to
select "TAG FX Spectral" and then turn the top knob to select the preset "Ac. GtrPhase1" Press the
encoder button to load the patch. Of course if there is a different chorus you'd like to use on the
guitar, feel free to select it now.
4. Bring up the gain on Input A, and verify that the green and yellow level indicators light on a
regular basis, but the Red indicator never illuminates.
5. Now it's time to plug in the Microphone into Input B, and select an appropriate compression
effect on that input. Turn the gain control to minimum, plug in the microphone, and if it is a
condenser microphone that requires 48V phantom power, press the switch to apply phantom power.
6. Now we want to select an appropriate preset for use with the microphone signal. Press the AUD2
button, and you will see that the input is turned off:
7. Now turn the bottom knob to select the "TAG: FX Vocal", and select the preset "Smooth Lead Vox."
8. Now press the PLAY button to hear both effects simultaneously. Pretty cool, yes?