Muse Research MusePlayer manual v1.0 - Manual (Page 15)

Rendering to audio / MIDI Controlers
English 15
Note: for layer parameters, MIDI CC will only automate the
layer that is visible. In a similar way, it will automate the
selected LFO.
N° Description
07 Master volume
20 FX1 On/Off
21 FX1 Parm Knob #1
22 FX1 Parm Knob #2
23 FX1 Parm Knob #3
24 FX1 Parm Knob #4
25 FX1 Parm Knob #5
30 FX2 On/Off
31 FX2 Parm Knob #1
32 FX2 Parm Knob #2
33 FX2 Parm Knob #3
34 FX2 Parm Knob #4
35 FX2 Parm Knob #5
70 Multimode Filter: filter type selection.
71 Master filter cut frequency
74 Master filter resonance
73 Amp. Envelope Attack
75 Amp. Envelope Decay
76 Amp.Envelope Sustain
72 Amp.Env. Release
77 Filter Cutoff
78 Filter Resonance
79 Filter Env Depth*
80 Filter Key Follow
(0=MIDI value 64)
81 Layer A level
82 Layer B level
83 Layer A Pan
84 Layer B Pan
85 Pitch coarse Layer A
86 Pitch coarse Layer B
87 Pitch fine Layer A
88 Pitch fine Layer B
N° Description
89 Pitch Mod Amount *
90 Filt Mod Amount *
91 Amp Mod Amount *
92 Pan Mod Amount, *
93 Pitch Env Depth, *
94 Pitch Env Time
95 Selected LFO Depth
96 Selected LFO Rate
97 Filter Envelope Attack
98 Filter Envelope Decay
99 FilterEnvelope Sustain
100 FilterEnvelope Release
101 FilterEnvelope Vel. Time
102 FilterEnvelope Vel. Sens
103 AmpEnvelopeVel. Time
104 AmpEnvelope Vel. Sens
105 Sample Start
106 Layer A Mute
107 Layer B Mute
108 Layer select
109 Link On/Off
110 Drive
111 Drive Mode
112 Timbre
* Note bipolar parameters: MIDI value of zero will switch the
polarity of this parameter.
MIDI Continuous Controller Table