NOYAFA NF-8208 - Manual (Page 9)

Test Result 1: Short circuit (SHORT)
It displays as follows if there is any short circuit in cable or terminal: (e.g.12
short circuit in the sample)
Short:
12
At the moment,push key to restart testing or push key to return main
menu.Always correct short circuit error first and then start further
measurement.
Test Result 2: it will display as follows if the far-end of cable to be
checked does not insert into the far-end matcher (ID) or if the cable does
not into the local(L)in local test:
No adapter:
At the moment, push key to restart testing or push key toreturn
main menu.
Test Result 3: Normal wiring diagram (WIREMAP) display
it will display wiring diagram (WIREMAP) as follows if it is found the far-
end matcher (ID) or the local port (L) on the far-end of cable to be checked:
Wire map:pass
R: 12345678 id1
Iiiiiiii
M: 12345678
" R" means Remote unit "M" means Mian tester
At the moment, push key to restart testing or push key to return
main menu.
PAIR&L
PAIR&L
PAIR&L
Your excellent helper in cable test! 06