NOYAFA NF-388 - Manual (Page 9)

Test Result 1: Short circuit (SHORT)
It displays as follows if there is any short circuit in cable or terminal:
(e.g.12 short circuit in the sample)
Short:
12
At the moment, push key to restart testing or push key to return
main menu.Always eliminate “short”error firstly and then start further
measurement.
Test Result 2: It will display as follows if the cable to be checked does
not insert into the remote unit (ID) or if the cable does no insert into the
local port.
No adapter:
At the moment, push key to restart testing or push key toreturn
main menu.
Test Result 3: Normal wiring diagram (WIREMAP) display
The tester will automatically detect remote unit (ID) or local port (L)cable
and it will display wiring diagram (WIREMAP) as follows if it finds the
remote unit (ID) or cable to be checked in the local port(L):
Wire map:pass
R: 12345678 id1
Iiiiiiii
M: 12345678
"R" means “Remote tester” , "ID1"is the number of Remote identifier .
"|" is the connecting line between “R” and “M”.
"M:" means “Main tester”.
At the moment, push key to restart testing or push key to return
main menu.
PAIR&L
PAIR&L
PAIR&L
Your excellent helper in cable test! 06