PRG Mbox Studio Manual 3.9 - Manual (Page 28)

20 MBOX ® STUDIO USER MANUAL
Licensing Mbox Software
CAUTION! Always install the Mbox software before licensing!
Software-only license (eSellerate)
If you purchased a software-only license online, then you should have received a receipt and an email with your serial
number. The serial number will start with the characters "PRGMBS-" for Mbox Studio or "PRGMBM-" for Mbox Mini.
To license your installation of Mbox, you must then connect the computer to the internet and launch the Mbox
application. Then enter your serial number in the License area of the Mbox Setup window.
If you purchased a software-only license directly through the licensing portal built into the Mbox application, then the
software should be automatically licensed at the successful completion of your purchase. You should still receive an
email receipt with your serial number in case you need to re-license your computer at a later date.
Hardware License USB Key (Dongle Drivers)
When you first install the Mbox software, the installer will give you the option to install the USB license key drivers as
well. If you don't have a USB license key, you don't need to install the drivers. If you purchased a USB license key at
a later time, then the drivers can be downloaded and installed from the link on the previous page. Once the drivers are
installed, Mbox will recognize the license key.
If the Mbox application fails to recognize the USB key at any point after the drivers are installed, please contact PRG
for assistance.