Overheat sensor, Temperature sensor, Air filter – Proheat X45–School Bus User Manual
Page 16: Blower assembly, Proheat control module (pcm)
Advertising
SECTION 1. TECHNICAL SPECIFICATIONS
1-7
OVERHEAT SENSOR
•
Lubricate o-ring with o-ring lubricant
•
Torque senor to 500±50 in/lbs (56±5.6 Nm)
TEMPERATURE SENSOR
•
Lubricate o-ring with o-ring lubricant
•
Torque senor to 25±3 in/lbs (2.8±0.3 Nm)
AIR FILTER
•
Torque cap screw to 50±5 in/lbs (5.6±0.6 Nm)
BLOWER ASSEMBLY
•
Apply anti-seize to bolts (4)
•
Torque bolts (4) to 25±3 in/lbs (2.8±0.3 Nm)
PROHEAT CONTROL MODULE (PCM)
•
Apply anti-seize to bolts (3)
•
Torque bolts (3) to 75±7 in/lbs (8.5±0.8 Nm)
Advertising