Proheat T-I - Manual (Page 12)

Manual & Timed Heater Operation
The “Manual” button is used to turn the heater
on and of f when desired.
STEP 1 Press “Manual” to activate the heater. (Red light
will go on and the heater will operate indefinitely.)
STEP 2 Press “Manual” again to de-activate the heater.
(Red light will go out and the heater will turn off.)
NOTE: “Manual” & “Timer” cannot be active at the
same time. If “Manual” is active and “Timer”
is pressed, the heater will turn of f and the red
light goes out.
If “Timer” is active and “Manual” is pressed,
“Timer” is de-activated and the green light
goes out.
When the heater has been turned on by the
“T1 Timer” in single timer mode, the heater
can be turned off by pressing either “Manual”
or “Timer”. Both red and green lights will go out.
If the heater has been turned on by the “T1
or T2 Timer” in dual timer mode, pressing
“Manual” will turn the heater of f but leaves
the Timer(s) activated. Pressing “Timer” will
turn off the heater and de-activate the Timer(s).
10