PS Engineering PAR200A Pilot’s Guide User Manual

Page 10

Advertising
background image

Page 10

202-228-0200

PAR200A

Pilot Guide

presented to the passenger positions.
Music 1 can be presented to all aircraft occupants in All or ISO if the Music
1 all headset switch (optional) is used at the rear connector control pin.

Music Muting (9)

There are two SoftMute™ muting circuits. The front panel
"Mute" button has four modes, and controls the Mute func-
tion for music 1. Music 2 muting is controlled by an exter-
nal switch, and has two modes.
The SoftMute™ circuit will cut the music out whenever
there is conversation on the radio, the intercom, or both,
depending on the “Mute” mode selected. When that conversation stops, the
music returns to the previous level comfortably, over a second or so.
The mute mode functions are controlled through sequential pushes of the
Mute button, and include LED indication of the mode selected.

MUTE ON: Music will mute with either intercom or radio – MUTE ON

button is lit.

RADIO MUTE: Intercom will not mute music, radio will mute music. RAD

LED indicator is on

INTERCOM MUTE: Radio will not mute music, intercom will mute music

- MUTE ICS LED is ON.

MUTE OFF: “Karaoke” mode - music will not mute except during outgoing

transmissions.- All Indicators off.

Music 2 Mute Control

The passengers’ intercom also has a SoftMute™ circuit. If the passengers
hear the radio, or talk on the intercom, the music will mute. If the audio
panel is in CREW mode, then the radio reception will not affect the passen-
ger music.
Passengers also have a Karaoke Mode. When the passengers are listening to
the music 2 input, their Karaoke Mode is activated by an external switch.

Mode

LED

Intercom

Radio

Mute On

ON

Muted

Muted

Radio Mute

RAD

Muted

Intercom Mute

ICS

Muted

Mute Off

None

Advertising