Set up red rocket in redcine-x pro, Set up decoding and error message prefernces, Set up decoding and error message prefernces 24 – RED ROCKET User Manual
Page 24: Red rocket installation instructions
Advertising
COPYRIGHT © 2014 RED.COM, INC
RED ROCKET INSTALLATION INSTRUCTIONS
955-0035, REV-B
|
24
SET UP DECODING AND ERROR MESSAGE PREFERNCES
1. Open REDCINE-X PRO.
2. Click the RED ROCKET icon.
The Rocket Setup window opens. If the window does not open, then the RED ROCKET firmware, and/or
driver are not installed.
3. Select the check boxes that apply to how you want to use the RED ROCKET:
‒ Use for decoding
‒ Show Rocket Error dialog on startup: Select this to display an error in the Status panel when the
RED ROCKET is installed in a lane slower than a x8 slot. For example, if your RED ROCKET is installed
in a Thunderbolt chassis, you will see this error because Thunderbolt is limited to x4 open lane speeds.
04
SET UP RED ROCKET
IN REDCINE-X PRO
Advertising