Canon PC1308 - Manual (Page 149)

List of Messages That Appear on the Screen
149
Cannot select!
• When selecting the selection range (pp. 108, 112, 114), you tried to select a
starting image that was after the last image or you tried to select an ending
image that was before the starting image.
• You tried to select more than 501 images (pp. 108, 112, 114).
Cannot transfer!
•
You cannot send incompatible images by direct transfer or images with
corrupted data even if they are selected.
• You cannot send a movie to as a background image on your PC even if it is
selected (p. 122).
Too many marks
• You selected more than 998 images to send in print settings. Select less than
998 images (pp. 123, 126).
Cannot complete!
• Print settings or transfer settings could not be saved correctly. Reduce the
number of settings and try again (pp. 123, 126).
Naming error!
• The file name could not be created because there is an image with the same
name as the folder that the camera is attempting to create, or the highest
possible file number has already been reached (p. 134). In the
3 menu, change
[Image Number] to [Auto reset] (p. 134) or format the memory card (p. 50).
Incompatible WAVE
• Since the data type of the existing sound memo is incorrect, no new sound
memo can be added or played back (p. 121).
Communication error
• Images could not be transferred to the computer due to the large amount of
images (approx. 1000) stored on the memory card (p. 31). Use a commercially
available USB card reader to download the images.
Lens error, restart camera
• A lens error was detected. Press the power button to turn the camera off and
back on (p. 40). If this error message continues to display, contact your Canon
Customer Support Help Desk as there may be a problem with the lens.
• This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
Exx (xx: number)
• A camera error was detected. Press the power button to turn the camera off and
back on (p. 40).
• If an error code displays directly after taking a picture, the shot may not have
been recorded. Check image in playback mode.
•
If this error code reappears, note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
COP
Y