Sceptre X22WG-1080P User Manual
Page 20
Page20 SCEPTRE X22
If You Have HDMI Connection on Your HD Box…
1.
Make sure the power of X22 LCD MONITOR is turned off.
2.
If you have HDMI connection on your HD set-top box,
purchase a HDMI to DVI video conversion cable and connect
the HDMI end to the HD set-top box. Connect the DVI end to
the X22 LCD monitor. Make sure you match the shapes on
both connections.
3.
Purchase a 3.5 mm mini-jack to female RCA audio conversion
cable and connect the RCA red / white end to regular RCA red
/ white cables and regular RCA red / white cables to your HD
set-top box. Connect the 3.5 mm Mini-jack end to the X22 LCD
MONITOR’s Audio In connection.
4.
Turn on the X22 LCD MONITOR and your video device.
Please Note :
•
Please reference your set-top box manual to make
sure the proper settings are configured for your
video device.
•
If you have a DVI out on your HD box, you can
use a DVI cable to get video.