Sevylor QuikPak K5 Kayak - Manual (Page 4)

INFLATABLE QUIKP
AK™ KA
YAKS
4
®
IMPORTANT! Inflate the product chambers in the following order:
K5 QuikPak™ Kayak
1. Inflate the floor chamber.
2. Inflate the DIN chamber.
3. Inflate the outside main chamber.
K3 QuikPak™ Kayak
1. Inflate the inner main chamber.
2. Inflate the outer main chamber.
K1 QuikPak™ Kayak
1. Inflate the two foot wells chambers.
2. Inflate the inner main chamber.
3. Inflate the outer main chamber.
4. Inflate seat back.
The chambers on the product will also be numbered to indicate order
of inflation. This order of inflation will ensure the proper volume and
buoyancy of the safety chamber.
Note: To inflate the mini Double Lock™ valve, which is used on
some of the Sevylor
® product floors and seat bottoms, follow the
same inflation instructions above or previous instructions, using the
mini Double Lock™ valve adapter. The mini Double Lock™ valve
adapter is included with all Sevylor
® pumps. The adapter can be
purchased from Sevylor Customer Service by calling
1-800-835-3278 (Part Number 5010000707).
Water temperature and weather does affect the pressure in inflatable
products. In cold weather your product will lose some pressure due
to the fact the air will contract. If this occurs, you may want to add
a little air to improve your products performance. However, in hot
weather, the air will expand. You must let some air out to prevent
your product from failing due to overpressure. You should avoid
exposing your product to extreme temperatures (hot or cold).
CAUTION!
DEFLATION INSTRUCTIONS
Deflation instructions using any
Sevylor
® QuickPump™ unit:
Deflation instructions using the
Sevylor
® Dual Action Hand Pump:
Remove adapter hose from inflation end and attach to
opposite deflation end of pump. Repeat same steps
as inflation. This will draw the air out quickly. Remove adapter hose from inflation port and attach
to deflation port. Repeat same steps as inflation. This
will draw the air out quickly.