Solvline SerialGate - Manual (Page 31)

SerialGate User Guide
31
SG-1160/ALL Exterior

Serial: RJ-45 socket for serial ports (RS-232/422/485). A user can select protocol in web
browser.

Power connector: for connection of 100 ~ 245 VAC cable

Reset: SerialGate reboots if this button is pressed for less than 3 seconds. If pressed for
longer than 3 seconds, SerialGate will restore factory default settings.

LED: Operation status of SerialGate. Next section describes the meaning of each LED
display status.

WAN: Main network port used when connecting SerialGate to networking devices such as
Ethernet card, hub, and router.

LAN:
보조 네트워크 포트로 NAT 모드로 동작하여 SerialGate에서 하부 네트워크에 연
결된 디바이스와 연결하거나 Bridge 모드로 동작하여 Switch 포트 역할을 한다.

SD / MMC: SD memory card works for system log. Available up to 32 Gbytes. (SD memory
not included in the package)

LCD: CLCD (16 * 2 line). Configuration and monitoring SerialGate via LCD.

LCD Button: Composed of 4 keys to control LCD. (Esc, Enter, Left, Right)