Solvline Eddy Serial v2.5.1.1 User Manual
Page 78
Eddy User's Guide
78
AT&V
Response
S0:m0;S1:m1; …Sn:mn
OK
Purpose
Display all the S-registers
Description All parameters are stored at S-register in flash memory. These values are sustained until
hardware reset.
Response
S0:m0;S1:m1; …Sn:mn
OK
ATSnn?
Response
value
OK
Purpose
Display a given S-register
Parameters nn= Address of S-register
Description A specific S-register will be displayed.
ATSnn=mm
Response
OK
Purpose
Change S-register value
Parameters nn= Address of S-register
mm= New value of S-register
Description Some S-registers are optimized for the overall performance and protected and cannot
be changed. When users try to change these S-registers, response is ‘ERROR’.
For details of S-register, refer Appendix. B.
Example
ATS10=0
Command Validity
Operation Status
AT Command
Standby
Pending
Connect
AT
○
○
ATZ
○
○
AT&F
○
○
AT+BINQ?
◎
ATD112233445566
◎
ATD
◎