Dive mode settings [dive – SUUNTO MOSQUITO User Manual
Page 71

69
4.3. DIVE MODE SETTINGS [DIVE]
In this mode you can select the type of dive mode to be
used (Air, Nitrox or Free) or turn the dive modes OFF.
If the dive modes are turned OFF, the dive computer
functions are disabled, thus turning the Mosquito into
a mere water resistant sportswatch.
NOTE: If the DIVE mode is disabled (set to OFF), the
instrument will not activate the selected diving mode
(Air, EAN, Free) when submerged.
4.3.1. SET AIR MODE
To set the Air mode:
1. In the Setting Mode, press S three (3) times to
select the Dive Setting Mode (Fig. 4.7.).
2. Wait two seconds until the Dive Setting Mode
activates automatically. The enable/disable status
[On/OFF] starts to blink on the display and the
selected dive mode (AIR, EAN or FREE) is displayed
(Fig. 4.8.)
While the enable/disable status [On/OFF] is selected
(blinking) press + or - to change the status.
Fig. 4.8. Set Air/EAN/Free
Mode. Enable/disable status
blinks.
Fig. 4.7. Dive Setting Mode.