TeeJet FieldPilot Install Ford Versatile 8x6-9x6 - Manual (Page 15)

www.teejet.com
13
FieldPilot ®
7. install the tank hOse
Route the 90° end of hose (L) to adapter (S) previously installed in the T port on the orbital. Connect the
straight end of the (L) hose to the T port of the FieldPilot Valve.
Figure 1-10: Install the Tank hose
L
L
8. install leFt and right steer hOses
The steer hoses will connect to the Run Tees installed at the orbital. In Step 4, the left and right steer hoses
were disconnected, Run Tees were installed, and the hoses were reconnected. Now connect the 90° ends of
hoses (M) to the branch of the tees and route the hoses to the A and B ports of the FieldPilot Valve.
Figure 1-11: Install Left and Right Steer Hoses
M
M