Tie Down LP750 - Manual (Page 7)

Page 7
WARNING
A loose fit between the coupler and hitch ball can cause the actuator and hitch
ball to separate, causing serious damage, injury or death. Check coupler every
time prior to towing and at each stop on long trips. Always make certain that
coupler latch safety pin is securely installed into coupler latch.
WARNING
Brake laws sometimes are minimum standards and you may wish to add addi-
tional brakes to your trailer. Read your tow
vehicles owner’s manual on towing capacity and other towing recommenda-
tions before installing brakes or this actuator.
WARNING
NEVER ALLOW THE COUPLER LATCH SAFETY PIN TO REMAIN IN THE
REVERSE LOCKOUT POSITION HOLE. AFTER REVERSE MANEUVERING, ALWAYS
INSERT COUPLER LATCH SAFETY PIN BACK INTO COUPLER LATCH. FAILURE TO
REMOVE SAFETY PIN FROM REVERSE LOCK OUT POSITION HOLE WILL PREVENT
FORWARD MOVEMENT BREAKING WHICH CAN RESULT IN SERIOUS PROPERTY
DAMAGE, INJURY
OR DEATH.