Toa VM-3000 Series - Manual (Page 147)

147
16.10. VP-2421 Power Amplifier 1 x 420W
28 V DC (operating range: 20 – 40 V DC)
M4 screw terminal, distance between barriers: 12 mm
7.6 A
420 W (at min. resistive and max. capacitive load)
320 W (at min. resistive and max. capacitive load)
100 V (70 V, 50 V: selectable by internal wiring change)
24 Ω (at 100 V), 12 Ω (at 70 V), 6 Ω (at 50 V)
0.5 μF (at 100 V), 1 μF (at 70 V), 1 μF (at 50 V)
1
Specified by input module VP-200VX
1
VP-200VX
Power amplifier output (speaker line):
M3.5 screw terminal, distance between barriers: 8.8 mm
40 Hz – 16 kHz, ±3 dB (at 1/3 rated output)
Under 1% (at rated output, 1 kHz)
Over 80 dB
Channel power indicator: 1 channels, dual colour LED
Overheat indicator:
Yellow LED
0 to +40°C
Panel: Surface-treated steel plate, black (30% gloss), paint
482 (w) x 88.4 (h) x 340.5 (d) mm
9.5 kg
Power Source
Current Consumption (EN60065)
Rated Output Power
Output Power
(at AC Mains: 195.5 V)
Output Voltage
Minimum Resistive Load
Maximum Capacitive Load
Number of Channels
Input
Number of Module Slots
Usable Module
Output
Frequency Response
Distortion
Signal-to-Noise Ratio
Panel Indicator
Operating Temperature
Finish
Dimensions
Weight
• Accessories
Rack mounting screw (5 x 12) .............................. 4
Fiber washer ........................................................ 4
Note: The design and specifications are subject to change without notice for improvement.