Toa C-A771DM - Manual (Page 2)

* The object illumination of the camera equipped with the C-A771DM needs approximately 3.3 times that of the C-CC774
Camera with the pre-installed dome cover.
Note: The design and specifications are subject to change without notice for improvement.
Cover: PC resin, Light gray
Dome: PC resin, Smoked (Transmission factor: 30%)*
ø219.8 x 138 (H) mm (ø8.7 x 5.4 (H) inch)
(Dome: ø150 mm (ø5.9 inch))
450 g (0.99 lb)
C-CC714, C-CC764, C-CC774
Finish
Dimensions
Weight
Applicable Camera
Be sure to attach the Smoked
Dome Cover to the Camera
after hanging the safety wire.
3. INSTALLATION
Detach the pre-installed transparent cover from the camera, and attach the Smoked Dome Cover instead.
For attaching procedures, refer to the installation manual supplied with the Camera.
4. SPECIFICATIONS
133-05-424-80