Toa C-CC774 PL - Manual (Page 56)

56
8.7. Reset Operation (Action) Setting
Specify the camera’s operation when alarm conditions are reset.
Note
The camera’s alarm reset operation function, and the C-RM500 Controller’s camera alarm function and
camera alarm preset function are operated independently, and cannot be used together. Also, the C-RM500’s
alarm hold function cannot be used to hold alarm reset operation.
To enable the camera’s alarm operation function, set the C-RM500’s Camera Alarm Settings to OFF.
1. On the Alarm Setting screen, select “RESET ACTION,” then
press the Set key.
2. On the Alarm Reset Operation Setting screen, select the
number, then press the Set key.
3. Select “OFF,” “ *** POS,” “TOUR1 – 16,” “AUX1 ON,” “AUX2
ON,” “AUX1 OFF,” “AUX2 OFF,” “TRACE1,” “TRACE2,” or
“HOME” with the joystick, then press the Set key.
3-1 When item other than “ *** POS” is selected
Selecting the items other than “ *** POS” record camera
operation (Action).
3-2 When “ *** POS” is selected
3-2-1 Enter the position number with numerical keypad, then
press the Set key.
3-2-2 Pressing the Set key displays the selected position
number on the monitor screen.
4. Repeat Step2, 3 to record the camera operation
corresponding to each receiving input number.
Note
AUX2 : C-CC564 and C-CC574 only
Alarm setting screen
I N P U T
* A L A R M *
R E P O R T
A C T I V E S T A T E
P R I O R I T Y
A C T I O N
I N T E R V A L
R E S E T A C T I O N
A L A R M D A T A
Alarm reset operation setting screen
* A L A R M *
R E S E T A C T I O N
- - - - - - - - - - - - - - - - - - - - - - - - - - -
1 : 3 P O S
2 : T R A C E 1
3 : T O U R 1
4 : 3 2 P O S
6 : O F F
5 : O F F
7 : O F F
8 : O F F