Toa C-RM700 - Manual (Page 8)

8
9 8 7
6 5 4
2 1
FOCUS IRIS
REMOTE CONTROLLER C-RM700
WIDE TELE F8 F7 F6 F5 F4 F3 F2 F1
MENU CH
ALARM
HOLD RESET
WIPER AUX1 AUX2 AUTO
FREEZE CONTROL POSITION CAMERA
AF LENS SPEED
3
0 SET C
GROUP
SELECT
SEQUENCE
MENU CH
ALARM
HOLD RESET
WIPER AUX1 AUX2 AUTO
LCD screen
Displays character information for the setting
menu, numeric keypad input status, current
operation, etc.
Function keys [F1 - F8]
A single depression of one of these keys displays
the full-screen image of the key's corresponding
preset camera number and position number.
Each key can also be set to activate automatic
operations (panning, tracing, preset sequence,
and tour) of the selected Combination camera.
Lens speed key *2
Adjusts the speed of lens operation when the
Zoom or Focus key is pressed.
The focus moves slowly while the key lights.
Used to fine adjust the focus.
Auto-focus key *2
Enables the Combination camera's Auto-focus
function. This key can only be used when the
Control key is lighting.
Focus key *2
Sets the Combination camera's zoom lens for
"FAR" or "NEAR" operation. The Focus key can
only be used when the Control key is lighting.
Iris key
Adjust the camera's iris level.
Note
This key cannot be used for the camera with a
type A communication method.
5. NOMENCLATURE AND FUNCTIONS
[Top]
Notes
Depending on the system configuration, the operation of some keys may be disabled. The corresponding keys
are marked with the following indications.
*1 Functions only when the multi-switcher is connected to this unit.
*2 Functions only when the Combination camera is connected to this unit.