VACUUBRAND PC 3012 NT VARIO Duo User Manual
VACUUBRAND Pumps
Advertising
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check care-
fully the validity of this document with respect to his product. Manual-no.: 2614930 - 999266 / 31/03/2014
Technology for Vacuum Systems
Instructions for use
Customized equipment PC 3012 NT VARIO Duo
2614930
Attention: Please observe the notes in the supplementary sheet.
Advertising
Table of contents
Document Outline
- Notice: Customized equipment
- Part I
- Reset / Language selection
- Safety information!
- Technical data
- Use and operation
- Installation
- Vacuum connection (inlet)
- Separator (AK) at the inlet
- Connecting the outlet
- Exhaust waste vapor condenser (EK) at the outlet
- Emission condenser Peltronic at the outlet
- Vacuum connection of the CVC 3000 vacuum controller
- Electrical connection
- During operation
- Important notes regarding the use of gas ballast
- In case of condensation
- Shutdown & storage
- Vacuum controller CVC 3000
- Menu guide
- Pump down function
- Vac Control function
- Auto mode
- Program function
- VACUULAN function
- Application examples
- Configuration
- Part II
- Readjustment of CVC 3000
- Calibration in the factory
- Cleaning the pressure transducer
- Interface parameters
- Accessories / Spare parts
- Troubleshooting
- Replacing diaphragms and valves
- Notes on return to the factory
- Warranty
- Health and safety clearance form
- EC Declaration of Conformity of the Machinery