Vexilar V-150 - Manual

9/9/12 Vexilar V-‐‑150 Charger Instructions
1/1 vexilar.com/pages/support/instructions/instructions_v-‐‑150.php
V-­150 Charger Instructions
Site Map • Contact Us • Privacy Statement • Terms of Use
©2012 Vexilar,
Inc.
1. Connect the charger to a standard 110 volt wall outlet. The
red light should come on.
2. Connect the charger clips to the battery. The red light
should go off. Make sure you match the red clip to the
positive battery terminal and the black clip to the negative
terminal.
3. Charge the battery until the red light comes back on to full brightness.
Then disconnect the charger from the outlet and the battery.
Charge the battery after each use. Let it charge until the red LED lights
to full brightness. Normal recharge times will be between 12 and 24
hours for a 7-­amp/hr battery, but a completely dead battery will need
over 48 hours to fully recharge. Do not let it charge for more than 72
hours after the light has come back on.
Charge the battery at room temperature. If the battery is used in a
cold environment allow it to warm up before starting to charge. Cold
batteries will not charge.
To store the battery for an extended period of time, remove all current
drains and store with a full charge. Store it in a cool place and top off
the charge every 60 days.
Home
•
Products
•
Accessories
•
Wear
•
Support
•
Pro-­Staff
•
Extras