Conair INFINITI 224 - Manual (Page 14)

KNOw EVERYTHING ABOuT THE INFINITI HAIR DESIGNER PRO BY CONAIR ™
KNOw EVERYTHING ABOuT THE INFINITI HAIR DESIGNER PRO BY CONAIR ™ KNOw EVERYTHING ABOuT THE INFINITI HAIR DESIGNER PRO BY CONAIR ™
KNOw EVERYTHING ABOuT THE INFINITI HAIR DESIGNER PRO BY CONAIR ™
If the cord or dryer is damaged or does not operate properly, return it for repair to an authorized Conair
service representative only. No repairs should be attempted by the consumer.
STORAGE - Important
When not in use, your dryer should be disconnected, allowed to cool and stored in a safe, dry location, out of
reach of children. Do not wrap line cord around dryer. Allow the cord to hang or lie loose and straight at the
point of entry into the dryer.
uSER MAINTENANCE
Your dryer is virtually maintenance free. No lubrication is needed. For proper operating performance, the dryer
must be kept clean.
When cleaning is needed, unplug the cord, allow to cool and clean dust and lint from air intake openings with
a small brush or the brush attachment of a vacuum cleaner. The outer surface of the dryer should be wiped
clean with a cloth only.
Blocked or clogged air intake vents will cause the dryer to overheat. If overheating occurs, an automatic
safety device will shut the dryer or the heat off to prevent damage or personal injury. If the unit or the heat
turns off, unplug the cord and allow the dryer to cool for 10 to 15 minutes before restarting. Make sure the air
vents are clean.
CAuTION
NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around
the dryer. Damage will occur at the high flex point of entry into the dryer, causing it to rupture and short.
Inspect the cord frequently for damage. Stop use immediately if damage is visible or unit stops or
operates intermittently.